• J-Link JTAG Isolator

    The J-Link JTAG Isolator can be connected between J-Link and any ARM-board that uses the standard 20-pin JTAG-ARM connector to provide electrical isolation.

    €198,00 Price incl. 20% VAT: €237,60
  • J-Link SWD Isolator

    The J-Link SWD Isolator can be connected between J-Link and any ARM-board that uses the standard 20-pin 0,1" male connector to provide electrical isolation.

    €198,00 Price incl. 20% VAT: €237,60
  • J-Link RX Adapter

    The J-Link RX Adapter allows JTAG connections between J-Link and target hardware which comes with the Renesas RX600 series MCUs.

    €49,00 Price incl. 20% VAT: €58,80
  • J-Link 19-Pin Cortex-M Adapter

    The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems.

    €24,00 Price incl. 20% VAT: €28,80
  • J-Link 9-Pin Cortex-M Adapter

    The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems.

    €24,00 Price incl. 20% VAT: €28,80
  • J-Link ARM 14-Pin Adapter

    This adapter allows to use J-Link with ARM7/9/11 targets using this 14-pin 0.1" mating JTAG connector defined by ARM.

    €49,00 Price incl. 20% VAT: €58,80
  • J-Link TI 14-Pin Adapter

    The J-Link TI 14 pin Adapter allows JTAG connections between J-Link and target hardware which use a TI MCU and provides a 14-pin connector.

    €49,00 Price incl. 20% VAT: €58,80
  • J-Link Needle Adapter

    The J-Link Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming header. The designed pattern with 3 locating pins ensures, that the adapter can only be connected in one way.

    €79,00 Price incl. 20% VAT: €94,80

The J-Link JTAG Isolator can be connected between J-Link and any ARM-board that uses the standard 20-pin JTAG-ARM connector to provide electrical isolation.

J-Link JTAG Isolator

€198,00

Price incl. 20% VAT: €237,60

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-8-detail_1.png 198,00

Add To Cart

Continue Shopping

The J-Link SWD Isolator can be connected between J-Link and any ARM-board that uses the standard 20-pin 0,1" male connector to provide electrical isolation.

J-Link SWD Isolator

€198,00

Price incl. 20% VAT: €237,60

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-7-detail_1.png 198,00

Add To Cart

Continue Shopping

The J-Link RX Adapter allows JTAG connections between J-Link and target hardware which comes with the Renesas RX600 series MCUs.

J-Link RX Adapter

€49,00

Price incl. 20% VAT: €58,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-6-detail_1.png 49,00

Add To Cart

Continue Shopping

The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems.

J-Link 19-Pin Cortex-M Adapter

€24,00

Price incl. 20% VAT: €28,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-5-detail_1.png 24,00

Add To Cart

Continue Shopping

The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems.

J-Link 9-Pin Cortex-M Adapter

€24,00

Price incl. 20% VAT: €28,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-4-detail_1.png 24,00

Add To Cart

Continue Shopping

This adapter allows to use J-Link with ARM7/9/11 targets using this 14-pin 0.1" mating JTAG connector defined by ARM.

J-Link ARM 14-Pin Adapter

€49,00

Price incl. 20% VAT: €58,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-3-detail_1.png 49,00

Add To Cart

Continue Shopping

The J-Link TI 14 pin Adapter allows JTAG connections between J-Link and target hardware which use a TI MCU and provides a 14-pin connector.

J-Link TI 14-Pin Adapter

€49,00

Price incl. 20% VAT: €58,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-2-detail_1.png 49,00

Add To Cart

Continue Shopping

The J-Link Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming header. The designed pattern with 3 locating pins ensures, that the adapter can only be connected in one way.

J-Link Needle Adapter

€79,00

Price incl. 20% VAT: €94,80

http://www.carnica-technology.com/service-center/carnica-online-shop/overview-adapters/Payloom5/payloom-1-detail_1.png 79,00

Add To Cart

Continue Shopping